K2 Thread

TheChef · Post by **TheChef** » 27 Jun 2014 09:43

Whether battery got power or no power, change battery every 2 years at least and use only Made in Japan batteries.

phantom150 · Post by **phantom150** » 27 Jun 2014 12:27

balzebub71 wrote:
Dun scare me leh? U mean quartz watch battery even when still got juice also might leak? I think the battery in my Hammie is around 4 years liao and the one in my SMP is around 2 years but both still ticking away..

dun just quote me, Google is just a few clicks away, watch battery leaking, omega battery leaking.

and of cos dun make the mistake of just reading 1st 3 links or page 1 results only

Lgt · Post by **Lgt** » 27 Jun 2014 13:17

OT a bit. Personally I have not had a battery leak on my watch, but I had a leak on a remote controller. Bought a replacement, and instead of throwing the old one away, I figured no harm put it under alkaline water to wash off the acid leak and let it dry for a few days. Surprisingly, it sprung back to life. Tried this last option instead of throwing your quartz watch, perhaps it might work?

phantom150 · Post by **phantom150** » 27 Jun 2014 15:49

Lgt wrote:OT a bit. Personally I have not had a battery leak on my watch, but I had a leak on a remote controller. Bought a replacement, and instead of throwing the old one away, I figured no harm put it under alkaline water to wash off the acid leak and let it dry for a few days. Surprisingly, it sprung back to life. Tried this last option instead of throwing your quartz watch, perhaps it might work?

i did this on several remote b4 from tv to aircon n fan, aircon remote hardest to pry open, not screw on, but snap on type of plastic

remote control pcb is relatively simple, u see a ic and many round spots only, thats it

remove plastic cover, took out pcb, wipe or spray with electronic contact cleaner.

put back and install fresh or useable battery.

use any phone or camera with camera lens on, put lens facing the "led" looking thing and press all the buttons, if it blinks the remote is working.

sometimes u get some buttons not working also, while some working. or totally not working lo.. depends on luck.

again depends on how much the leak has seep onto the pcb, has the acid started to "attack" pr breakdown the pcb 1st insulated layer yet.

Wade · Post by **Wade** » 28 Jun 2014 19:46

will k2 extend the operation hour for ramadan period

pacman1188 · Post by **pacman1188** » 28 Jun 2014 20:09

Extend hours also no use. Kena stuck in traffic on the way there and then thought of the parking problems there.... took U-turn and ended up in Geylang.

phantom150 · Post by **phantom150** » 28 Jun 2014 21:55

always he will extend later during this period.

always park in singpost during this period

rojakman · Post by **rojakman** » 29 Jun 2014 11:51

I am planning to pop over tomorrow afternoon. shouldnt be crowded over at that area in the daytime right?

telepgm · Post by **telepgm** » 29 Jun 2014 16:49

rojakman wrote:I am planning to pop over tomorrow afternoon. shouldnt be crowded over at that area in the daytime right?

Going to K2 in this period will be EPIC. I hope you got a lot for parking and attention from Mr. Goh. He's got lots on his plate in the coming weeks.

rojakman · Post by **rojakman** » 29 Jun 2014 17:21

telepgm wrote:
Going to K2 in this period will be EPIC. I hope you got a lot for parking and attention from Mr. Goh. He's got lots on his plate in the coming weeks.

what's happening in the coming weeks?
just receive my mod parts and I thought of getting it done tomorrow. probably get down around 2pm.

Astro2212 · Post by **Astro2212** » 29 Jun 2014 22:22

rojakman wrote:
telepgm wrote:
Going to K2 in this period will be EPIC. I hope you got a lot for parking and attention from Mr. Goh. He's got lots on his plate in the coming weeks.
what's happening in the coming weeks?
just receive my mod parts and I thought of getting it done tomorrow. probably get down around 2pm.

Hari raya...

Ed.YEO · Post by **Ed.YEO** » 29 Jun 2014 23:41

Wade wrote:will k2 extend the operation hour for ramadan period

phantom150 wrote:always he will extend later during this period.
always park in singpost during this period

The pre-Hari Raya build up of jobs is not the only peak period in Goh's calender. Usually CNY sees queues starts as early as 6 wks away.

pacman1188 · Post by **pacman1188** » 30 Jun 2014 15:23

I think Goh was extremly busy on Sunday. Passed by and saw him sold one TUDOR, one SEIKO titanium Diver and one SEIKO wall clock, all very nice ones. Pop and change out one crystal. Replace maybe 6 batteries & 3 straps. All within 30-40 minutes!

But he was unable to help me with my CASIO MTG, anyone know where to find a MTG 120 steel bracelet?

rojakman · Post by **rojakman** » 30 Jun 2014 18:35

I was there around 2pm today. it was still ok. just like his normal days. constant business.

met 2 senior bros there and they were very friendly to share their knowledge and watch collection with me.

balzebub71 · Post by **balzebub71** » 30 Jun 2014 19:48

How come when I go, I never meet anyone one..

Wade · Post by **Wade** » 30 Jun 2014 20:21

Astro2212 wrote:
rojakman wrote: what's happening in the coming weeks?
just receive my mod parts and I thought of getting it done tomorrow. probably get down around 2pm.
Hari raya...

it is true that hard to get a parking lots during this period

ivan · Post by **ivan** » 30 Jun 2014 20:26

balzebub71 wrote:How come when I go, I never meet anyone one..

Post your pix here.
I sure say hi "if" I go there.
Steady bo

SleepySimon · Post by **SleepySimon** » 01 Jul 2014 11:01

phantom150 wrote:

they are here again

Ooo... How much are these? Might want to fit one on my MM300

Trident · Post by **Trident** » 04 Jul 2014 19:49

got the mesh on my 5

jtfoo · Post by **jtfoo** » 04 Jul 2014 20:57

How much is the mesh? Thanks

K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread

Re: K2 Thread