Page 2 of 5
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 21:53
by oOsiMm
Good to see some guys stepping up to spearhead this project..and I believe with the burning passion from you guys and all supporters,this project will become a reality soon.
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 21:55
by lunarin79
The dial is the soul of everything, take your time to slowly finetune the design(if any).
Dun rush things, if it drags over the next few months, it's common.
Ultimately, we hope to achieve a perfect or near perfect dial design
loke what Roo had said, we will be here to support & give advise
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 22:01
by eguy899
lunarin79 wrote:The dial is the soul of everything, take your time to slowly finetune the design(if any).
Dun rush things, if it drags over the next few months, it's common.
Ultimately, we hope to achieve a perfect or near perfect dial design
loke what Roo had said, we will be here to support & give advise
慢工出稀货!take your time... do not rush! thanks guys!
Seiko forum watch process of watch case & design
Posted: 23 May 2012 22:02
by devil00
Can someone tell me the logo is what? I can't figure out Sia
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 22:07
by aiken74
devil00 wrote:
Can someone tell me the logo is what? I can't figure out Sia
SC 65 bro...
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 22:09
by oOsiMm
devil00 wrote:
Can someone tell me the logo is what? I can't figure out Sia
viewtopic.php?f=21&t=3060&start=140" onclick="window.open(this.href);return false;
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 22:20
by Ed.YEO
eguy899 wrote:慢工出
稀货!take your time... do not rush! thanks guys!
Brudder... 1 word could have different effect... you had really chosen the right word to describe the end product.
稀 as in rare, as in niche...
Hopefully ya guys take your time wisely on finalizing the design as well as fine tuning the cost.
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 22:23
by eguy899
Ed.YEO wrote:eguy899 wrote:慢工出
稀货!take your time... do not rush! thanks guys!
Brudder... 1 word could have different effect... you had really chosen the right word to describe the end product.
稀 as in rare, as in niche...
Hopefully ya guys take your time wisely on finalizing the design as well as fine tuning the cost.
Seiko forum watch process of watch case & design
Posted: 23 May 2012 22:29
by devil00
aiken74 wrote:devil00 wrote:
Can someone tell me the logo is what? I can't figure out Sia
SC 65 bro...
Can't find the 65 in it only see sc:(
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 22:31
by lunarin79
devil00 wrote:
Can't find the 65 in it only see sc:(
u have to look beyond it
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 22:35
by oOsiMm
devil00 wrote:aiken74 wrote:
SC 65 bro...
Can't find the 65 in it only see sc:(
prolly you haven open the artistic eye....
hmm...
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 22:43
by roo7
oOsiMm wrote:devil00 wrote:
Can't find the 65 in it only see sc:(
prolly you haven open the artistic eye....
hmm...
sibei cheem....
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 22:54
by Ed.YEO
I think i can see the SC65 in the logo...
The logo is made up of 2 strokes, 1 a "S" with the middle section straightened, 2, a big C that rounds up the S.
The top part of the S curves along with the perimeter of the C, but kept a little distance.
The lower part of the S looks like a tail, that joins the perimeter of the C.
If fellow brudders couldn't see, not surprising. As the logo are all in a single color.
It will be easy to tell, if the logo can be made up of 2 colors... like yellow for S, orange for C... but that will affect the cost liaoz...
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 22:55
by lunarin79
i will suggest keeping to just 1 colour for the logo
too many colours will spoil the look imo
my 20cts view
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 22:57
by zeikphur
Eh the center portion resembles a wave. From there u will see a 6 and as 5 & S are similar in their strokes, its also the same shape created. Hope this clarifies all doubts
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 22:59
by lunarin79
remember zeikphur, on screen, it's easy to draft out a logo
but when on actual printing on dial, take note the fine gap between 2 strokes might be 'lost'
maybe u can try to shorten the 'S' so both gaps have a cut-off distance on actual print
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 23:02
by zeikphur
Yup, noted bro, need to do one according to scale. Does any bro know the size of a 007 dial?
Re: Seiko forum watch process of watch case & design
Posted: 23 May 2012 23:18
by lunarin79
is the 12:00 hour marker be like this or it's not to scale yet?
actually if this is gonna be an all customised dial, we can think of something diff, for the hour markers, need not follow back the traditional dive marker style?
make it a unique dial
rectangula-ish? so it matches the hour hand
or the tip of the min hand (house/arrow shape?)
my 30cts
Re: Seiko forum watch process of watch case & design
Posted: 24 May 2012 00:58
by big-e-294
zeikphur wrote:Yup, noted bro, need to do one according to scale. Does any bro know the size of a 007 dial?
seiko dials are 28.5mm
Re: Seiko forum watch process of watch case & design
Posted: 24 May 2012 10:21
by Cosmograph
kiatkiat wrote:As a whole watch
1)devil00
2)Zhwong
3)pst666
4)Ivan
5)okies
6) Feilong108
7) yowech
8) Zeikphur
9) sawung
10) Kiatkiat
11) Cosmgraph
Dial& Hands)
(Dial ONLY)
1) Astro2212
2) Cosmograph
Can I get extra dial also?