Sandoz Explorer

[lunarin79]

I was browsing thru WUS & saw this model FS(sold by now).


A guy whom I met last week, told me this particular model is difficult to find, this particular Explorer style.

I saw this watch at Tanjong Katong Complex but iirc, the logo is different, it looked like this


anybody owns this model?

or any opinions on this model?

ETA 2824, price tag is S$600+

[herzausstahl]

Erm.. Me loh. Not much opinion, except that it is well made, and back then costs below $300 from Mustafa. Design-wise it's not the most original I've owned

Sent from my KVH Tracphone V3 using Tapatalk 2

[lunarin79]

Erm.. Me loh. Not much opinion, except that it is well made, and back then costs below $300 from Mustafa. Design-wise it's not the most original I've owned

Sent from my KVH Tracphone V3 using Tapatalk 2

you have one of these?

mustafa doesn't sell Explorer for sure.

Only place is that shop in T.K Complex,lol

[herzausstahl]

Now no more? Next time I go will ssrr

Sent from my KVH Tracphone V3 using Tapatalk 2

[lunarin79]

Now no more? Next time I go will ssrr

Sent from my KVH Tracphone V3 using Tapatalk 2

u mean mustafa still have Explorer?

hahah, shall go ssll too

[dragonboat02]

u mean mustafa still have Explorer?

hahah, shall go ssll too

Hmm... i happened to be there yest and dun rem seeing this model.. in fact, their sub model only left with a pepsi nia..

[lunarin79]

hahaa ok, thks bro

[Vinc04]

I was at Bencoolen yesterday and there is this shop call Mei Mei... Remember they have a section on Sandoz.. But I can only recall seeing some sub like models.. Didn't pay any attention to the rest.

But the Explorer model is nice... 36 or 40mm?

[phantom150]

I was at Bencoolen yesterday and there is this shop call Mei Mei... Remember they have a section on Sandoz.. But I can only recall seeing some sub like models.. Didn't pay any attention to the rest.

But the Explorer model is nice... 36 or 40mm?

ot a bit, since i got into watches, i think i had not step inside there b4.

b4 i knew k2, i had wanted to get springbars, not sure of the sizes either 24mm or 26mm n didnt bring a sample, walked in and asked $6 a pc!! lucky i mentioned its either 24 or 26, they hesitated to sell me!!! instead ask me bring sample

i bought later at 3d for $2, subsequently i came to know of k2 from ceo and rest is history.

its rather obvious in terms of operation n size they are similar to 3D AND WINS, but always see lesser crowds inside.

[lunarin79]

I was at Bencoolen yesterday and there is this shop call Mei Mei... Remember they have a section on Sandoz.. But I can only recall seeing some sub like models.. Didn't pay any attention to the rest.

But the Explorer model is nice... 36 or 40mm?

36mm

around same size as 6694 & explorer I

[Vinc04]

I was at Bencoolen yesterday and there is this shop call Mei Mei... Remember they have a section on Sandoz.. But I can only recall seeing some sub like models.. Didn't pay any attention to the rest.

But the Explorer model is nice... 36 or 40mm?

ot a bit, since i got into watches, i think i had not step inside there b4.

b4 i knew k2, i had wanted to get springbars, not sure of the sizes either 24mm or 26mm n didnt bring a sample, walked in and asked $6 a pc!! lucky i mentioned its either 24 or 26, they hesitated to sell me!!! instead ask me bring sample

i bought later at 3d for $2, subsequently i came to know of k2 from ceo and rest is history.

its rather obvious in terms of operation n size they are similar to 3D AND WINS, but always see lesser crowds inside.

Bro, if you are looking for spring bars, try this "stall" outside Bencoolen.. It's a push cart stall run by a uncle and his wife. It is usually seen along the Fu Lu Shou building (the one that sells a lot Buddhist and Fung shui thing? Opposite the food centre?) this uncle has a small stall with a Chinese signboard.... Does repairs for watches etc and has a wide variety of spring bar. Cost is like $3-4 also.

[Vinc04]

I was at Bencoolen yesterday and there is this shop call Mei Mei... Remember they have a section on Sandoz.. But I can only recall seeing some sub like models.. Didn't pay any attention to the rest.

But the Explorer model is nice... 36 or 40mm?

36mm

around same size as 6694 & explorer I

Ok so like the old Explorer 1. 36mm... Hmmm... Maybe can go walk walk again and see if can find it

[peh23]

Hi,
As of what I knew, u can get spring bar from Guangzhou china those watch mart. Many sizes in a box that cost about $10 per box. Buy one keep as spare.

[telepgm]

Discont long time ago...law suit model, correct?

The Sandoz Explorer "3" is widely distributed in multibrand store. I used to have one myself, after modding the hands to the Mercedes ones instead of the original gold bars:



It's still a pretty good tribute... My 2 cents.

[lunarin79]

hmm, i think I had seen these Explorers FS at Tanjong Katong Complex Vincent Watch.

They has a Sandoz section inside the shop

[telepgm]

hmm, i think I had seen these Explorers FS at Tanjong Katong Complex Vincent Watch.

They has a Sandoz section inside the shop

Keep us posted! The Silver Black Sandoz Explorer is definitely worth hunting for.

[lunarin79]

hmm, i think it's available there,haha

[telepgm]

hmm, i think it's available there,haha

if there are 2 & the price is reasonable , score one for me! Thanks in advance. Be in touch over whatsapp. Thanks Mr. CEO.

[balzebub71]

these sandoz explorers are 36mm without crown?

[lunarin79]

these sandoz explorers are 36mm without crown?

Already inclusive of crown if not wrg