Racing Themed Watches

[Astro2212]

tag monaco


REAL cf dial


RACING on the caseback n clasp

[rogue_hog]

Bro Yeo, I saw this in early April! But i'm controlling my pocket la, not so deep like yours

Plus it's a little too small at 39mm leh, if it's 41mm or 42mm i would have hooted already

the watch is nice.. but that is one butt-ugly logo, no offense to those who likes the logo.

Actually. I agree with u.

[LB1981]

tag monaco


REAL cf dial


RACING on the caseback n clasp

Fit the theme well. Swee swee.

[salokiN]

the watch is nice.. but that is one butt-ugly logo, no offense to those who likes the logo.

Actually. I agree with u.

It's not that bad la, is it? Hahaha, kinda like a wax stamp feel i guess?

[rogue_hog]

Actually. I agree with u.

It's not that bad la, is it? Hahaha, kinda like a wax stamp feel i guess?

Yes it is that bad.

[Ed.YEO]

Actually. I agree with u.

It's not that bad la, is it? Hahaha, kinda like a wax stamp feel i guess?

Initially when i saw that back case, the first thing that comes into my mind, was... "waah... nice looking ROTOR sia...", then when i look closely, confirm it's a decorating backcase which is going to be a "deadskin" magnet... nice to look, difficult to clean...

[fireal]

Ya lo looks like will trap gunk

Sent from my HTC One X+ using Tapatalk 2

[roo7]

Wrist cheese


Sent from my iPhone

[zeikphur]

Wrist cheese


Sent from my iPhone

Gonna smell xia

[Jeryltan]

Can i check. The steinhart racetimer has screw in pushers for the chrono. It works the opposite as the screw in crown is it? The screw in crown is supposed to be screwed in to be water resistant and the screw in chrono pusher supposed to screw out when going underwater so you don,t accidentally press it?


Sent from my iPad using Tapatalk HD

[fireal]

Should be same clockwise to tighten

Sent from my HTC One X+ using Tapatalk 2

[Jeryltan]

Should be same clockwise to tighten

Sent from my HTC One X+ using Tapatalk 2

Oh. Hm. Then in what situation would i unscrew it? Bcos if i unscrew all the way, i can't press them

[rogue_hog]

Can i check. The steinhart racetimer has screw in pushers for the chrono. It works the opposite as the screw in crown is it? The screw in crown is supposed to be screwed in to be water resistant and the screw in chrono pusher supposed to screw out when going underwater so you don,t accidentally press it?


Sent from my iPad using Tapatalk HD

Should be same as crown in terms of direction.

Logically you need to unscrew fully to activate the pushers.

[Ed.YEO]

Should be same clockwise to tighten

Oh. Hm. Then in what situation would i unscrew it? Bcos if i unscrew all the way, i can't press them

Clockwise to tighten usually will found in DIVER's Chrono. In RACETIMER's case, due to low water resistance specs, the screw in/out pusher guard act as... pusher guard. So when you unscrew out, you cannot activate the chrono?

[Jeryltan]

Oh. Hm. Then in what situation would i unscrew it? Bcos if i unscrew all the way, i can't press them

Clockwise to tighten usually will found in DIVER's Chrono. In RACETIMER's case, due to low water resistance specs, the screw in/out pusher guard act as... pusher guard. So when you unscrew out, you cannot activate the chrono?

That,s what i tot so too


Sent from my iPad using Tapatalk HD

[Jeryltan]

Can i check. The steinhart racetimer has screw in pushers for the chrono. It works the opposite as the screw in crown is it? The screw in crown is supposed to be screwed in to be water resistant and the screw in chrono pusher supposed to screw out when going underwater so you don,t accidentally press it?


Sent from my iPad using Tapatalk HD

Should be same as crown in terms of direction.

Logically you need to unscrew fully to activate the pushers.

Yeap direction is same but usage seems opposite as i can,t use the buttons when i release the lock on the chrono pushers


Sent from my iPad using Tapatalk HD

[rogue_hog]

Oh. Hm. Then in what situation would i unscrew it? Bcos if i unscrew all the way, i can't press them

Clockwise to tighten usually will found in DIVER's Chrono. In RACETIMER's case, due to low water resistance specs, the screw in/out pusher guard act as... pusher guard. So when you unscrew out, you cannot activate the chrono?

chim.

[Jeryltan]

Clockwise to tighten usually will found in DIVER's Chrono. In RACETIMER's case, due to low water resistance specs, the screw in/out pusher guard act as... pusher guard. So when you unscrew out, you cannot activate the chrono?

chim.

Think u,all mistaken the design. The screw in/out on the chrono pusher is moving a sleeve surroundg the pusher. Nt the pusher itself. If u know what i mean


Sent from my iPad using Tapatalk HD

[rogue_hog]

chim.

Think u,all mistaken the design. The screw in/out on the chrono pusher is moving a sleeve surroundg the pusher. Nt the pusher itself. If u know what i mean


Sent from my iPad using Tapatalk HD

you're saying the screw/ nut itself is the sleeve? it slides slides freely up and down the pusher when it's unscrewed? or dose it move up the pusher when unscrewed? if it's the latter, then it's similar to diver's chrono.

[Jeryltan]

Think u,all mistaken the design. The screw in/out on the chrono pusher is moving a sleeve surroundg the pusher. Nt the pusher itself. If u know what i mean


Sent from my iPad using Tapatalk HD

you're saying the screw/ nut itself is the sleeve? it slides slides freely up and down the pusher when it's unscrewed? or dose it move up the pusher when unscrewed? if it's the latter, then it's similar to diver's chrono.

It moves as u unscrew. Doesn,t move freely


Sent from my iPad using Tapatalk HD