Pushers on Citizen Bullhead 8110

sucmeup · Post by **sucmeup** » 29 Sep 2011 22:54

Can anyone help with the replacement of a pusher on a 8110. I cant figure it out please help.

oOsiMm · Post by **oOsiMm** » 29 Sep 2011 22:57

I dont have any citizen bulllhead but maybe some SC bro has parts/knowledge in replacing.

But just to clarify bro,what do you need ?

pusher spare parts or need help in replcing it?

sucmeup · Post by **sucmeup** » 29 Sep 2011 23:16

I have the pushers and springs just need some direction. the flyback pusher seems to have fallen off and this is my favorite watch. it must be fixed.

phantom150 · Post by **phantom150** » 29 Sep 2011 23:59

sucmeup wrote:I have the pushers and springs just need some direction. the flyback pusher seems to have fallen off and this is my favorite watch. it must be fixed.

Did u push in n turn, so the wide part will catch onto ur case's slot.

I am thinking from the pt of view of seiko 6138 n 6139 pushers .

Else try k2, since its ur fav watch, better let Goh do with his professional hands.

Sent using tapatalk

tanwill · Post by **tanwill** » 30 Sep 2011 09:54

OK, since u hv the pushers and springs.
What is missing is the E-clip <think size is 1.5mm>.

U needs to use a small plier to hold the E-clip and push it into the Pusher's end (both pusher and spring installed onto case).

*if you are going to buy the E-clip, make sure you buy extra as sometime they tends to "fly-off" when install.

Hope it helps.

sucmeup · Post by **sucmeup** » 30 Sep 2011 10:05

Thanks everyone I'll be making this repair this weekend hey I have another question does anyone know if I can put a "see thru" caseback on the 8110

Pushers on Citizen Bullhead 8110

Pushers on Citizen Bullhead 8110

Re: Pushers on Citizen Bullhead 8110

Re: Pushers on Citizen Bullhead 8110

Re: Re: Pushers on Citizen Bullhead 8110

Re: Pushers on Citizen Bullhead 8110

Re: Pushers on Citizen Bullhead 8110